11A, Jalan PJS 11/20,
Bandar Sunway,
46150 Petaling Jaya,
Selangor, Malaysia.
Hanna Instruments (M) Sdn Bhd
N0. 303-2-27, Krystal Point,
Jalan Sultan Azlan Shah,
11900 Sungai Nibong,
Penang, Malaysia.
+604-638 4558
+604-645 4558
penang@hannamalaysia.com
Sabah Branch Office
Hanna Instruments (M) Sdn Bhd
No. 4-1, 1st Floor,
Plaza Kingfisher,
Jalan Plaza Kingfisher 5,
Inanam, 88450 Kota Kinabalu,
Sabah, East Malaysia.
088-382 941
088-382 942
sabah@hannamalaysia.com
HI98539 Checktemp® Dip Digital Thermometer
Previous | 3 / 8 | Next |
RM 465.00
- CAL Check™
- Selectable °C/°F readout
- AISI 316 Stainless Steel Probe
-
Details
The Checktemp Dip Digital Thermometer is a high-accuracy NTC thermistor thermometer connected to a weighted, stainless steel probe by a 3 m (9.9’) flexible, silicone cable.
The weighted, stainless steel probe is designed to measure temperature in tanks, vats, streams, and lakes. Attached to the meter by 3 m of cable, the probe is capable of taking temperature readings at various depths. The probe is made of AISI 316 stainless steel which makes it easy to clean and ideal for temperature measurement in a variety of food and beverage applications such as in wine casks or milk storage tanks.
The HI98539 Checktemp Dip is equipped with Hanna’s exclusive CAL Check® feature for reliable and accurate measurements. CAL Check automatically runs a self-check upon startup and looks for any drift in the internal electronics. The Checktemp Dip then reports the instruments status back to the user in a matter of seconds; 0 for ok and Err if something is wrong.
Features at-a-glance:
- ±0.3°C (±0.5°F) Accuracy
- CAL Check™ - Automatically verifies calibration at startup
- 3 m (9.9’) silicone cable
- °C/°F readout – User selectable
- Clear LCD display that is easy to read
- IP 65 water resistant protection
- HACCP Compatible - Use as a tool for control in HACCP analysis
- AISI 316 stainless steel weighted probe
- User-selectable auto-off (select from 8 min., 60 min., or disable)
-
Specifications
Range (°C) -20.0 to 80.0°C Range (°F) -4.0 to 176.0°F Resolution (°C) 0.1°C Resolution (°F) 0.1°F Accuracy (°C) ±0.3°C Accuracy (°F) ±0.5 ºF Probe weighted stainless steel probe with 3 m (9.9’) silicone cable; 97.3 x dia 3.5 mm (3.8 x dia 0.14’’) Battery Life 3 x 1.5V AAA Batteries/Approximately 2 years of use Auto-off after ten minutes of non-use Environment -30 to 50°C (-22 to 122°F); RH max 95%; IP65 Dimensions 107 x 59 x 17 mm (4.2 x 2.3 x 0.7’’) Weight 109 g (3.8 oz.) Ordering Information HI98539 (Checktemp Dip) is supplied with weighted stainless steel probe, 3 m (9.9’) silicone cable, batteries, and instructions.