11A, Jalan PJS 11/20,
Bandar Sunway,
46150 Petaling Jaya,
Selangor, Malaysia.
Hanna Instruments (M) Sdn Bhd
N0. 303-2-27, Krystal Point,
Jalan Sultan Azlan Shah,
11900 Sungai Nibong,
Penang, Malaysia.
+604-638 4558
+604-645 4558
penang@hannamalaysia.com
Sabah Branch Office
Hanna Instruments (M) Sdn Bhd
No. 4-1, 1st Floor,
Plaza Kingfisher,
Jalan Plaza Kingfisher 5,
Inanam, 88450 Kota Kinabalu,
Sabah, East Malaysia.
088-382 941
088-382 942
sabah@hannamalaysia.com
HI729 Low Range Fluoride Colorimeter 每 Checker® HC
Previous | 19 / 37 | Next |
RM 312.00
Improve the accuracy of your water testing results with our simple handheld colorimeter.
With our low range fluoride colorimeter you achieve more precise technology than your standard chemical test kit. You won’t have to struggle to determine colors visually, our handheld colorimeter eliminates the hassle of matching to a color chart by providing a direct digital fluoride result.
Get your low range fluoride reagents here.
- Our portable handheld colorimeter goes where you go.
- Get simple results with easy one-button operation.
- Don’t waste time matching to a color chart anymore, get direct results quickly.
Details
The HI729 Checker® HC (Handheld Colorimeter) provides a simple, accurate and cost-effective way to measure fluoride.Fluoride is one of the few chemicals that have been shown to cause significant effects in people through drinking water. Fluoride has beneficial effects on teeth at low concentrations in drinking water, but excessive exposure to fluoride in drinking water, or in combination with exposure to fluoride from other sources, can give rise to a number of adverse effects.
Water fluoridation is the controlled addition of fluoride to a public water supply to reduce tooth decay. Fluoridated water operates on tooth surfaces: in the mouth, it creates low levels of fluoride in saliva, which reduces the rate at which tooth enamel demineralizes and increases the rate at which it remineralizes in the early stages of cavities. A 1994 World Health Organization expert committee suggested a level of fluoride from 0.5 to 1.0 mg/L, depending on climate. Bottled water typically has unknown fluoride levels, and some domestic water filters remove some or all fluoride.
Features at-a-glance:
- Easier to use and more accurate than chemical test kits
- Dedicated to a single parameter
- Small size, big convenience
- Ideal for: Drinking Water, Environmental, Industrial
Specifications
Range | 0.00 - 2.00 ppm |
---|---|
Resolution | 0.01 ppm |
Accuracy @ 25°C/77°F | ±0.10 ppm ±5% of reading |
Light Source | LED @ 575 nm |
Light Detector | silicon photocell |
Method | adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, SPADNS method |
Environment | 0 to 50°C (32 to 122°F); RH max 95% non-condensing |
Battery Type | (1) 1.5V AAA |
Auto-off | after ten minutes of non-use |
Dimensions | 81.5mm x 61mm x 37.5mm (3.2'' x 2.4'' x 1.5”) |
Weight | 64 g (2.25 oz.) |
Ordering Information | HI729 Checker® is supplied with (2) sample cuvettes with caps, fluoride LR reagent starter kit for 5 tests (1 bottle of fluoride LR reagent, 30 mL), (1) 1 mL syringe with tip, battery, instructions and quick start guide. |