11A, Jalan PJS 11/20,
Bandar Sunway,
46150 Petaling Jaya,
Selangor, Malaysia.
Hanna Instruments (M) Sdn Bhd
N0. 303-2-27, Krystal Point,
Jalan Sultan Azlan Shah,
11900 Sungai Nibong,
Penang, Malaysia.
+604-638 4558
+604-645 4558
penang@hannamalaysia.com
Sabah Branch Office
Hanna Instruments (M) Sdn Bhd
No. 4-1, 1st Floor,
Plaza Kingfisher,
Jalan Plaza Kingfisher 5,
Inanam, 88450 Kota Kinabalu,
Sabah, East Malaysia.
088-382 941
088-382 942
sabah@hannamalaysia.com
BL982411-1 ORP Mini Controller
| Previous | 5 / 31 | Next |
- Large Clear LCD
- Fire Retardant Casing
- BNC Connection
Adjustable Dosing Relay
The BL982411 features a dosing relay which may be configured to dose above or below a user programmable mV setpoint.
Selectable Overdose Protection
The mini controller may be programmed to deactivate a valve, pump, or connected device if its activation continues over a selected time; adjustable from 5 to 30 minutes.
Selectable Control Override
With the flick of a switch, normal “Auto” operation may be overridden turning your connected device “Off” from operation or always “On.”
Fuse Protected Dosing Contacts
The mini controller is protected for up to a 2A load from a connected pump or device.
Easy Peripheral Connection
Quick-connect terminal blocks provide for easy connection to power, communication, dosing control, or sensors.
Matching Pin Connection
An included matching pin option helps protect the sensor from ground loop effects that may lead to erratic readings or system damage.
Front View
Installation cut-out dimensions are provided as well as outside panel dimensions.
Side View
Adjustable location brackets allow the controller to slide easily and securely into place..
Specifications
| Range | 0 to 1000 mV |
|---|---|
| Resolution | 1 mV |
| Accuracy (@25°C/77°F) | ±5 mV |
| Calibration | manual, with CAL trimmer |
| Dosing Relay | maximum 2A (fuse protected), 250 Vac, 30 VDC |
| Dosing Selection |
reducing or oxidizing, selectable on the back panel contact open=reductant dosage=relay ON if measure > setpoint contact closed=oxidant dosage=relay ON if measure < setpoint |
| Setpoint | adjustable, from 0 to 1000 mV |
| Overtime | adjustable, typically from 5 to approximately 30 minutes |
| Input Impedance | 10¹² Ohm |
| Power Supply | BL982411-1: 230 VAC; 50/60Hz |
| Dimensions | 83 x 53 x 99 mm (3.3 x 2.1 x 3.9’’) |
| Weight | BL982411-1: 300 g (10.6 oz.) |
| Ordering Information | BL982411-1 (230V) is supplied with mounting brackets, transparent cover and instruction manual. |