11A, Jalan PJS 11/20,
Bandar Sunway,
46150 Petaling Jaya,
Selangor, Malaysia.
Hanna Instruments (M) Sdn Bhd
N0. 303-2-27, Krystal Point,
Jalan Sultan Azlan Shah,
11900 Sungai Nibong,
Penang, Malaysia.
+604-638 4558
+604-645 4558
penang@hannamalaysia.com
Sabah Branch Office
Hanna Instruments (M) Sdn Bhd
No. 4-1, 1st Floor,
Plaza Kingfisher,
Jalan Plaza Kingfisher 5,
Inanam, 88450 Kota Kinabalu,
Sabah, East Malaysia.
088-382 941
088-382 942
sabah@hannamalaysia.com
HI8073L Cleaning Solution for Proteins in FDA Bottle (500 mL)
Previous | 4 / 13 | Next |
RM 176.00
- Specially formulated enzymatic cleaning solution to remove proteins from a pH electrode
- Air tight seal to ensure quality and efficiency is maintained
- Light blocking FDA compliant bottle
Details
The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, the instrument assumes that the electrode is clean and that the standardization curve created during the calibration process will remain a valid reference until the next calibration. pH meters on the market today will allow an offset voltage of approximately ±60 mV. The deviation from 0 mV is not unusual but ideally should be no greater than ±30 mV. The calibration process compensates for the change in offset voltage. If the mV offset continues to deviate and the meter is calibrated with a dirty electrode then inaccurate readings will result.
The Cleaning Solution Series ensures maximum efficiency and accuracy of your sensors when used for it’s designated application. Cleaning is a fast and effective routine that should be performed on a regular basis as a preventative measure against using a dirty electrode and to ensure that the junction is not clogged. The HI8073L is a protein cleaning solution specifically for applications that involve the measurement of pH in a protein based solution.
FDA compliant bottle
-
Light blocking bottle to prevent against degradation by UV light
Air tight bottle with tamper-proof seal
-
Ensures quality and freshness of solution
Each bottle marked with lot number and expiration date.
-
Hanna cleaning solutions are specially formulated to have an expiration of 5 years from manufacture for an unopened bottle.
Specifications
Application | Proteins |
---|---|
Package | bottles |
Size | 500 mL |
Quantity | 1 |
Certificate of Analysis | No |
The Cleaning Solution Series ensures maximum efficiency and accuracy of your sensors when used for it’s designated application. Cleaning is a fast and effective routine that should be performed on a regular basis as a preventative measure against using a dirty electrode and to ensure that the junction is not clogged. The HI8073L is a protein cleaning solution specifically for applications that involve the measurement of pH in a protein based solution.