HI 935005N

 The HI766B is a surface K-type thermocouple probe with a handle designed for use with a thermocouple thermometer. A cable extends 1 m (3.3’) from the handle to the thermocouple connector with the meter. The flat, 16 mm diameter surface of the probe allows users to obtain highly accurate temperature readings of furnaces, molds, and other high-temperature solid surfaces.

The HI70602 humidity probe utilizes a high-tech thin-film polymer capacitance (TFPC) sensor. This sensor enables rapid response and high accuracy humidity and temperature measurements. The probe features a durable ABS body, perforated cap, internal temperature sensor, and built-in microchip that stores calibration data.

The HI768P is a general purpose penetration Pt100 probe designed for use with one of Hanna’s Pt100 thermometers. A cable extends 1 m (3.3’) from the handle to the meter connection. The sharp, pointed tip of the probe allows users to obtain highly accurate temperature readings of semi-solid and liquid samples.

The HI768L is an air and liquid Pt100 probe designed for use with one of Hanna’s Pt100 thermometers. A cable extends 1 m (3.3’) from the handle to the meter connection. The rounded tip of the probe allows users to obtain highly accurate temperature readings of air and liquid samples.

The HI768A is an air and gas Pt100 probe designed for use with one of Hanna’s Pt100 thermometers. A cable extends 1 m (3.3’) from the handle to the meter connection. The vent holes at the tip of the probe allow users to obtain highly accurate temperature readings of air and gases.

The HI766Z is a wire K-type thermocouple probe for ovens designed for use with a thermocouple thermometer. The stainless steel wire sensor extends 1 m (3.3’), 3 m (9.9’), or 7 m (22.9’) to the thermocouple connector with the meter; the HI766Z does not incorporate a handle. The thin yet sturdy wire probe allows users to obtain highly accurate readings inside ovens.

The HI766TV1 is a roller surface K-type thermocouple probe with a handle designed for use with a thermocouple thermometer. A cable extends 1 m (3.3’) from the handle to the thermocouple connector with the meter. The sensor that is housed inside the clamp allows users to obtain highly accurate temperature readings of pipes and tubes.

The HI766TR4 is an extended length penetration K-type thermocouple probe with a handle designed for use with a thermocouple thermometer. A green cable extends 1 m (3.3’) from the handle to the thermocouple connector with the meter. The sharp, pointed tip at the end of the 2 m probe allows users to obtain highly accurate temperature readings of semi-solids and liquids.

The HI766TR3 is an extended length penetration K-type thermocouple probe with a handle designed for use with a thermocouple thermometer. A green cable extends 1 m (3.3’) from the handle to the thermocouple connector with the meter. The sharp, pointed tip at the end of the 1.5 m probe allows users to obtain highly accurate temperature readings of semi-solids and liquids.

The HI766TR2 is an extended length penetration K-type thermocouple probe with a handle designed for use with a thermocouple thermometer. A green cable extends 1 m (3.3’) from the handle to the thermocouple connector with the meter. The sharp, pointed tip at the end of the 1 m probe allows users to obtain highly accurate temperature readings of semi-solids and liquids.

The HI766TR1 is an extended length penetration K-type thermocouple probe with a handle designed for use with a thermocouple thermometer. A green cable extends 1 m (3.3’) from the handle to the thermocouple connector with the meter. The sharp, pointed tip at the end of the 500 mm probe allows users to obtain highly accurate temperature readings of semi-solids and liquids.

The HI766PE2 is a general purpose, penetration K-type thermocouple probe designed for use with the HI766HD probe handle and thermocouple thermometer. The extended length and round, pointed tip of the probe allows users to obtain highly accurate temperature readings of a wide variety of liquid, air, and gas samples.

The HI766PE1 is a general purpose, penetration K-type thermocouple probe designed for use with the HI766HD probe handle and thermocouple thermometer. The round, pointed tip of the probe allows users to obtain highly accurate temperature readings of a wide variety of liquid, air, and gas samples.

The HI766PD is an air and gas K-type thermocouple probe designed for use with the HI766HD probe handle and thermocouple thermometer. The vent holes at the tip of the probe allow users to obtain highly accurate temperature readings of air and gases.

The HI766PC is a penetration K-type thermocouple probe designed for use with the HI766HD probe handle and thermocouple thermometer. The sharp, pointed tip of the probe allows users to obtain highly accurate temperature readings of semi-solids and high-temperature samples.

The HI766PB is a surface K-type thermocouple probe designed for use with the HI766HD probe handle and thermocouple thermometer. The flat, 16mm diameter surface of the probe allows users to obtain highly accurate temperature readings of furnaces, molds, and other high-temperature solid surfaces.

The HI766PA is a roller surface K-type thermocouple probe designed for use with the HI766HD probe handle and thermocouple thermometer. The flexible surface of the probe allows users to obtain highly accurate temperature readings of convex surfaces, moving rollers, and other facades that are difficult to measure.

The HI766F1 is a wire K-type thermocouple probe designed for use with a thermocouple thermometer. The exposed wire sensor extends 1 m (3.3’) or 5 m (16.4’) to the thermocouple connector with the meter; the HI766F1 does not incorporate a handle. The flexible wire probe allows users to obtain highly accurate readings of hard to reach surfaces.

The HI766F is a K-type thermocouple probe with a flexible sheath designed for use with a thermocouple thermometer. A cable extends 1 m (3.3’) from the end of the sensor to the thermocouple connector with the meter; the HI766F does not incorporate a handle. The pliable stainless steel probe allows users to obtain highly accurate readings of a variety of high-temperature surfaces.

The HI766E2 is an extended length general purpose, penetration K-type thermocouple probe with a handle designed for use with a thermocouple thermometer. A cable extends 1 m (3.3’) from the handle to the thermocouple connector with the meter.

The HI766E1 is a general purpose, penetration K-type thermocouple probe with a handle designed for use with a thermocouple thermometer. A cable extends 1 m (3.3’) from the handle to the thermocouple connector with the meter. The round, pointed tip of the probe allows users to obtain highly accurate temperature readings of a wide variety of liquid, air, and gas samples.

The HI766D is an air and gas K-type thermocouple probe with a handle designed for use with a thermocouple thermometer. A green cable extends 1 m (3.3’) from the handle to the thermocouple connector with the meter. The vent holes at the tip of the probe allow users to obtain highly accurate temperature readings of air and gases.

The HI766C1 is an ultra-fast penetration K-type thermocouple probe with a handle designed for use with a thermocouple thermometer. A green cable extends 1m (3.3’) from the handle to the thermocouple connector with the meter. The finely pointed, 1.6 mm diameter tip of the probe allows users to obtain highly accurate temperature readings of semi-solids and food samples.

The HI766C is a penetration K-type thermocouple probe with a handle designed for use with a thermocouple thermometer. A green cable extends 1 m (3.3’) from the handle to the thermocouple connector with the meter. The sharp, pointed tip of the probe allows users to obtain highly accurate temperature readings of semi-solids and high-temperature samples.