Hanna Instruments (M) Sdn Bhd
11A, Jalan PJS 11/20,
Bandar Sunway,
46150 Petaling Jaya,
Selangor, Malaysia.
Penang Branch Office
Hanna Instruments (M) Sdn Bhd
N0. 303-2-27, Krystal Point,
Jalan Sultan Azlan Shah,
11900 Sungai Nibong,
Penang, Malaysia.
+604-638 4558
+604-645 4558
penang@hannamalaysia.com
Sabah Branch Office
Hanna Instruments (M) Sdn Bhd
No. 4-1, 1st Floor,
Plaza Kingfisher,
Jalan Plaza Kingfisher 5,
Inanam, 88450 Kota Kinabalu,
Sabah, East Malaysia.
088-382 941
088-382 942
sabah@hannamalaysia.com
HI981420 GroLine Hydroponic Nutrients Monitor for pH, EC, TDS, and Temperature
| Previous | 1 / 2 | Next |
Hanna Instruments GroLine Monitor for Hydroponic Nutrient Solutions
The HI98142X GroLine Monitor for Hydroponic Nutrients provides around-the-clock, continuous monitoring of pH, conductivity (EC & TDS), and temperature in hydroponic nutrient solutions.
Quick to setup, simple to use, this monitor was designed with Hydroponics, Aquaponics, and Greenhouses in mind. Make your nutrient solution easy to manage with the GroLine Monitor.
- Get 24/7 pH&EC measurements for consistent yields every time.
- Good Laboratory Practice (GLP) feature for professional accuracy.
- Calibrate pH and EC with a single Quick Cal solution.
One quick glance is all it takes.
A large clear LCD displays all of your essential readings so you know what your hydroponic nutrients solution is doing 24/7. High and low alarms flash warning you if something needs adjusting.
Monitor changes over time.
The GroLine Monitor automatically logs your results every 15 minutes over the last 30 days. Minimum, maximum, and average values are stored so you can recognize when patterns arise and help prevent future problems.
Two probes to choose from.
HI98142X is available with a standard probes (left) or one with a 3/4'' threaded connection for insertion mounting.
Quick Cal for less maintenance.
A single calibration solution for pH and conductivity makes calibration fast and ensures all of your measurements are accurate all of the time for better plant health and better yield.
Features at-a-glance
-
3 sensors combined in a single rugged probe body: pH electrode with renewable cloth junction, amperometric EC/TDS sensor, and an internal temperature sensor for temperature compensated readings
-
IP65 rated enclosure: designed to withstand harsh grow environments
-
Wide pH Range: measure pH from 0.00 to 14.00 pH
-
Selectable EC to TDS/ppm conversion factor: choice of either a 0.5 or 0.7 conversion factor
- Automatic Temperature Compensation: all readings are compensated for variations in temperature, temperature displayed in oC or oF along with pH, EC or TDS reading
-
Large LCD with plant-friendly green backlighting: LCD can display all three essential hydroponic nutrient measurements at one time, a 3-second cycle of single measurements, or a real-time graph screen with options for measurement selection and log recall
-
Data logging for 30 days: logs every 15 minutes for last 30 days, stores min, max, and average values
-
Data transfer: USB-C port for easy data transfer to memory stick or PC
- High and low alarms: warns when your nutrient solution is out of desired range by flashing display and message
- Ambient light sensor: for automatic LCD dimming
| SKU | HI981420-02-web |
|---|---|
| Product Name | GroLine Monitor for Hydroponic Nutrients - HI981420 |
| Quote Required | Yes |
| pH Range | 0.00 to 14.00 pH; 0.0 to 14.0 pH |
| pH Resolution | 0.01 pH; 0.1 pH |
| pH Accuracy | ±0.05 pH; ± 0.1 pH |
| pH Calibration | one or two-point calibration (using pH 4.01,7.01, 10.01 buffers) using auto buffer recognition; one-point calibration using quick calibration solution |
| pH Temperature Compensation | automatic (0.0 to 60.0ºC/ 32.0 to 140.0°) |
| EC Range | 0.00 to 10.00 mS/cm |
| EC Resolution | 0.01 mS/cm |
| EC Accuracy | ±0.1mS/cm (0.00 to 5.00mS/cm); ±0.2mS/cm (5.00 to 10.00mS/cm) |
| EC Calibration | one-point at 1.41 mS/cm or 5.00 mS/cm using auto standard recognition; one-point calibration using quick calibration solution |
| TDS Range | 0 to 5000 ppm (TDS conversion factor 0.5 (500 CF)); 0 to 7000 ppm (TDS conversion factor 0.7 (700 CF)) |
| TDS Resolution | 10 ppm |
| TDS Accuracy | ±2% f.s. |
| EC/TDS Temperature Compensation | automatic |
| Temperature Correction Coefficient | β set at 1.9%/°C |
| EC to TDS Conversion Factor | TDS conversion factor 0.5 (500 CF); TDS conversion factor 0.7 (700 CF) |
| Temperature Range | 0.0 to 60.0°C / 32.0 to 140.0°F |
| Temperature Resolution | 0.1°C / 0.1°F |
| Temperature Accuracy | ±0.5°C /±1°F |
| Alarm Relay Set Point | high and low with enable/disable option for all parameters |
| Multi-parameter Probe |
HI981420 is supplied with the HI1285-8 probe HI981421 is supplied with HI1285-9 probe that has 3/4'' threaded connection for in-line pipe mounting |
| Logging Type | automatic logging for last 30 days at 15 minute interval |
| Connectivity | USB Type-C for flash drive or compatible device |
| GLP | last 5 pH and EC calibrations |
| Display | 128 x 64 pixel B/W LCD with green backlight |
| Power Supply | 12VDC adapter (included) |
| Environment | -5 to 50°C (23 to 122°F); RH max 95% non-condensing |
| IP Rating | IP65 |
| Dimensions | 125 x 185 x 38 mm (4.92 x 7.28 x 1.49”) |
| Weight | 333g ( 11.7oz.) |
| Ordering Information | HI981420 is supplied with |
| HI981421 is supplied with | HI1285-9 multi-parameter probe with threaded connection, HI50036-0 Quick Cal buffer solution sachet (2), HI700661P electrode cleaning solution sachets for agriculture (2), 12VDC adapter, calibration certificates for both meter and probe, and instruction manual. |