Hanna Instruments (M) Sdn Bhd
11A, Jalan PJS 11/20,
Bandar Sunway,
46150 Petaling Jaya,
Selangor, Malaysia.
Penang Branch Office
Hanna Instruments (M) Sdn Bhd
N0. 303-2-27, Krystal Point,
Jalan Sultan Azlan Shah,
11900 Sungai Nibong,
Penang, Malaysia.
+604-638 4558
+604-645 4558
penang@hannamalaysia.com
Sabah Branch Office
Hanna Instruments (M) Sdn Bhd
No. 4-1, 1st Floor,
Plaza Kingfisher,
Jalan Plaza Kingfisher 5,
Inanam, 88450 Kota Kinabalu,
Sabah, East Malaysia.
088-382 941
088-382 942
sabah@hannamalaysia.com
*HI3827 Boiler and Feedwater Chemical Test Kit
Previous | 69 / 86 | Next |
RM 1,660.00
- Pre-made reagents for ease of use
- All reagents marked with expiration date and lot number for traceability
- Portable carrying case for easy transport
Details
The HI3827 is a chemical test kit that determines that uses titration, colorimetry, and direct measurement to measure six parameters common to boilers and feedwater testing: alkalinity, chloride, hardness, phosphate, pH, and sulfite. The HI3827 is supplied with all of the necessary reagents and equipment to perform each analysis, and all reagents are individually available as they run out.Features at-a-glance
-
Complete setup
-
All required materials are included with the test kit, such as the pH tester, sample beaker, indicator and reagent bottles and packets, and color comparison cube.
-
-
High resolution
-
All tests provide a high resolution based on the expected range of measurement.
-
-
Replacement reagents available
-
There is no need to buy a new kit when reagents are exhausted. The reagents for each parameter can be ordered individually.
-
Significance of Use
Monitoring the alkalinity, chloride, hardness, phosphate, pH, and sulfite concentrations in boiler and feedwater is essential in preventing hazardous or costly situations. These parameters are important in determining the corrosive characteristics of water due to carbonates and chloride. Sulfite is also critical to prevent pitting and oxidation of metal components. A high level of sulfite results in a lowered pH, which can also promote corrosion.
pH Specifications
Range | 0.0 to 14.0 pH |
---|---|
Resolution | 0.1 |
Method | N/A |
Number of Tests | life of the meter |
CTK Type | electronic pH tester |
Alkalinity Specifications
Range | 0 to 100 mg/L (ppm) CaCO₃; 0 to 300 mg/L (ppm) CaCO₃ |
---|---|
Resolution | 1 mg/L (0 to 100 mg/L range); 3 mg/L (0 to 300 mg/L range) |
Method | phenolphthalein / bromophenol blue |
Number of Tests | 110 |
CTK Type | titration |
Chloride Specifications
Range | 0 to 100 mg/L (ppm) Cl⁻; 0 to 1000 mg/L (ppm) Cl⁻ |
---|---|
Resolution | 1 mg/L (0 to 100 mg/L range); 10 mg/L (0 to 1000 mg/L range) |
Method | mercuric nitrate |
Number of Tests | 110 |
CTK Type | titration |
Hardness Specifications
Range | 0.0 to 30.0 mg/L (ppm) CaCO₃; 0 to 300 mg/L (ppm) CaCO₃ |
---|---|
Resolution | 0.3 mg/L (0.0 to 30.0 mg/L range); 3 mg/L (0 to 300 mg/L range) |
Method | EDTA |
Number of Tests | 100 |
CTK Type | titration |
Phosphate Specifications
Range | 0 to 5 mg/L (ppm) PO₄³⁻ |
---|---|
Resolution | 1 mg/L |
Method | ascorbic acid |
Number of Tests | 50 |
CTK Type | colorimetric |
Sulfite Specifications
Range | 0.0 to 20.0 mg/L (ppm) Na₂SO₃; 0 to 200 mg/L (ppm) Na₂SO₃ |
---|---|
Resolution | 0.2 mg/L (0.0 to 20.0 mg/L range); 2 mg/L (0 to 200 mg/L range) |
Method | iodometric |
Number of Tests | 110 |
CTK Type | titration |
Specifications
CTK Type | Titration, Colorimetric, Multiparameter |
---|---|
Dimensions | 440 x 330 x 100 mm (17.3 x 13.0 x 3.9’’) |
Weight | 2.2 kg (4.8 lb) |
Ordering Information | HI3827 test kit includes all of the necessary reagents and accessories to perform over 100 tests for every parameter, with the exception of phosphate, which includes reagents for 50 tests, hard carrying case, and instructions. |