Hanna Instruments (M) Sdn Bhd
11A, Jalan PJS 11/20,
Bandar Sunway,
46150 Petaling Jaya,
Selangor, Malaysia.
+603-5638 9940
Penang Branch Office
Hanna Instruments (M) Sdn Bhd
N0. 303-2-27, Krystal Point,
Jalan Sultan Azlan Shah,
11900 Sungai Nibong,
Penang, Malaysia.
+604-638 4558
+604-645 4558
penang@hannamalaysia.com
Sabah Branch Office
Hanna Instruments (M) Sdn Bhd
No. 4-1, 1st Floor,
Plaza Kingfisher,
Jalan Plaza Kingfisher 5,
Inanam, 88450 Kota Kinabalu,
Sabah, East Malaysia.
088-382 941
088-382 942
sabah@hannamalaysia.com
HI3842 Total Hardness (400-3000 mg/L) HR Test Kit
| Previous | 66 / 86 | Next |
500 g
The HI3842 is a chemical test kit that measures total hardness as CaCO3 by titration with EDTA. The HI3842 is supplied complete with all of the reagents and equipment necessary to perform approximately 50 tests.
Specifications
- Pre-made reagents for ease of use
- All reagents marked with expiration date and lot number for traceability
- Manual titration performed with color indicator
Details
The HI3842 is a titration-based chemical test kit that determines the total hardness concentration within the 400 to 3000 mg/L (ppm) range. The HI3842 is supplied with all of the necessary reagents and equipment to perform the analysis. The test kit contains enough reagents for perform approximately 50 tests.
Features at-a-glance
Complete setup- All required materials are included with the test kit, such as the sample beaker and reagent dropper bottle.
- Readings from 400 to 3000 mg/L are determined to 100 mg/L resolution.
- There is no need to buy a new kit when reagents are exhausted. The HI3842-050 can be ordered to replace the reagents supplied with the kit.
Significance of Use
Water hardness has traditionally been defined as the capacity of water to precipitate soap. The ionic species in the water causing the precipitation was later found to be primarily calcium and magnesium. Thus, water hardness is actually a quantitative measure of these ions in the water. It is also now known that certain other ion species, such as iron, zinc, and manganese contribute to the overall water hardness. The measure and subsequent control of water hardness is essential to prevent scaling and clogging in water pipes.
Specifications
| Range | 400 to 3000 mg/L CaCO₃ |
|---|---|
| Resolution | 100 mg/L |
| Method | EDTA |
| Number of Tests | 50 |
| CTK Type | Titration |
| Weight | 120 g |
| Ordering Information | HI3842 test kit comes with 30 mL hardness HR reagent and 50 mL calibrated vessel. |