Hanna Instruments (M) Sdn Bhd
11A, Jalan PJS 11/20,
Bandar Sunway,
46150 Petaling Jaya,
Selangor, Malaysia.
+603-5638 9940
+603-5638 9829
Penang Branch Office
Hanna Instruments (M) Sdn Bhd
N0. 303-2-27, Krystal Point,
Jalan Sultan Azlan Shah,
11900 Sungai Nibong,
Penang, Malaysia.
+604-638 4558
+604-645 4558
penang@hannamalaysia.com

Sabah Branch Office
Hanna Instruments (M) Sdn Bhd

No. 4-1, 1st Floor,
Plaza Kingfisher,
Jalan Plaza Kingfisher 5,
Inanam, 88450 Kota Kinabalu,
Sabah, East Malaysia.
088-382 941
088-382 942
sabah@hannamalaysia.com

HI3131B Refillable Combination ORP Electrode with BNC Connector

Previous 1 / 11 Next

HI3131B Refillable Combination ORP Electrode with BNC Connector ORP Electrodes & Probes
RM 899.00
500 g
In Stock


The HI3131B is a glass body, refillable, single junction ORP electrode with a BNC connector. This electrode has a single ceramic junction as part of the reference cell and a platinum ORP sensing pin.

 

This design consideration is ideal for laboratories and general purpose ORP measurements, as well as for use as an indicating electrode in ORP titrations.

  • Refillable Electrode
  • Single Ceramic Junction
  • Platinum Pin

Details

Hanna Instruments offers a wide variety of ORP electrodes that are designed for many different applications. The type of material used for the sensing pin, type of glass used for body material, type of junction, type of reference and electrolyte used are just some of the design considerations.

The HI3131B uses a platinum pin, glass body, single ceramic junction and is refillable with 3.5M KCl + AgCl.



Platinum Sensing Pin

The HI3131B ORP sensor is made with platinum. An ORP sensor must be chemically inert; it cannot be oxidized or reduced itself. It must also have the proper surface characteristics to promote rapid electron exchange, a property known as high exchange current density. Two noble metals have proven to work well for this purpose: pure platinum and pure gold are both used in the construction of ORP sensors. The platinum sensor is often preferred because it is mechanically simpler and safer to produce. Platinum can be welded to glass and has the same thermal coefficient. The platinum sensor signal is carried through the electrode body, and together with the reference signal is conducted to the measurement meter. 

 



Glass Body

The glass body is ideal for laboratory use. The glass is resistant to many harsh chemicals and is easily cleaned. The glass body also allows for a fast transfer of heat to the internal reference electrolyte. The mV generated by the reference cell is temperature dependent. The faster the equilibrium the steadier the reference potential.

 



Single Ceramic Junction

The outer junction of an electrode, also known as a salt bridge, is necessary component of the electrical circuit. The movement of ions must flow through the junction for a steady reading. The outer reference has a single ceramic frit. The ceramic is a porous material that is easily fused with the glass body and has a similar expansion coefficient. A single ceramic junction has a flow rate of 15-20 μL/hour. Other junction types are available with higher flow rates and made with different materials.
 

 



Refillable

The HI3131B is a refillable probe. Since it is a single junction ORP electrode the fill solution is the HI7071 3.5M KCl + AgCl. If using a refillable ORP electrode, the fill cap should be removed prior to measurement. Removing the cap creates positive head pressure in the reference cell allowing for higher flow rate of electrolyte through the outer junction. A higher flow rate will result in a faster and more stable reading.  

 



BNC Connector

The HI3131B uses a BNC connector. This type of connector is universal in that it can be used on any pH meter that has the female BNC probe input. Other type of connectors include DIN, screw type, T-type, and 3.5mm to name a few. These types of connectors tend to be proprietary for a particular type of meter and are not interchangeable.
 

 

Specifications

Body Material glass
Reference single, Ag/AgCl
Junction / Flow Rate ceramic, single / 15-20 μL/h
Electrolyte 3.5M KCl + AgCl
Range ORP: ±2000 mV
Max Pressure 0.1 bar
Tip Shape platinum pin
Diameter 12 mm
Body Length / Overall Length 150 mm / 205.5 mm
Recommended Operating Temperature -5 to 70°C (23 to 158°F)
Temperature Sensor no
Matching Pin no
Amplifier no
Cable coaxial; 1 m (3.3’)
Connection BNC
Applications general purpose, laboratory general purpose, ORP titrations

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Messages*  
   

Free delivery within Selangor and Kuala Lumpur territory

You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version